Our company has accumulated extensive experience in the field of general-purpose and NC milling machines. We offer machines to meet your specifications
Top Page > Milling Machines > Bed Type NC Milling Machine Series
IB-1V is equipped with "Guidance Machining Menu" on the operation panel to allow you to operate the machine just by using the hand-wheel handle for circular, oblique or other machining impossible to perform with a conventional general-purpose milling machine. In addition, this NC milling machine is designed to switch the mode of operation between "hand-wheel manual feed" and "auto feed", achieving great improvement in efficiency compared to a conventional general-purpose milling machine.
IB-1V is designed with a fixed table and a movable head, which facilitates work-piece loading/unloading, movement and other operation, achieving a high degree of accessibility.
IB-1V is designed with an easy-to-operate teaching function (optional), which, when using the hand-wheel handle to perform a certain machining process consisting of serial steps, allows you to press the appropriate pushbutton inside the operation panel at the end of each step, causing the machine to memorize the position of the step to create a NC program upon completion of the machining process, which you can use to perform the same machining process.
| IB-1V | |
| Table size(mm) | 600x250 |
|---|---|
| Maximum load capacity(kg) | 200 |
| Table T slot (number x size) | 3x16H8x60 |
| Table longitudinal travel (max.)(mm) | 400 |
| Table cross travel (max.)(mm) | 200 |
| Table vertical travel (max.)(mm) | 200 |
| Distance from spindle end to table top(mm) | 180∼380 |
| Distance from spindle center to table top(mm) | - |
| Distance between spindle center and column front(mm) | - |
| Distance between spindle center and over-arm bottom(mm) | - |
| Longitudinal/cross/vertical cutting feed rate(mm/min) | 1∼4000 |
| Longitudinal/cross/vertical rapid feed rate(mm/min) | 10000 |
| Number of spindle speed steps | S code&volume control |
| Spindle speed(r.p.m) | 0∼4000 |
| Spindle nose shape | NST No.40 |
| Drawing bolt | UNC 5/8" |
| Quill feed rate(mm/rev) | - |
| Quill travel (max.)(mm) | 120 |
| Head swivel angle(°) | - |
| Ram travel (max.)(mm) | - |
| Ram swivel angel(°) | - |
| Over-arm travel (max.)(mm) | - |
| Spindle motor(kw) | AC spindle motor 3.7/5.5 |
| Longitudinal/cross feed motor(kw) | AC 1.2 |
| Vertical feed motor(kw) | AC 1.8 |
| Cutting oil pump motor(w) | 100 |
| Lubricating oil pump motor (sliding surface)(w) | 4 |
| Lubricating oil pump motor (head)(w) | - |
| Total power capacity(KVA) | 15 |
| Width x depth x height(mm) | 1705 x 2320 x 2300 |
| Total machine weight(kg) | 2000 |
| Standard accessories | •Table top splashguard •Drawing bolt (1pc) •Standard tools (1set) •Cutting oil unit (1set) •Leveling plate (4pcs) •Leveling bolt (1set) |
| Optional accessories/specifications | •Auto tool changer •Machining completion indicator lamp •Oil mist •Air blow •Lighting •Specified color •Teaching function |
